The Decoy Doctor Splasher Kit

⚠️ Pumps and batteries are not included. Recommended parts are listed in the Resource Section.

📖 Review before buying: This is a DIY kit and proper installation is required. Read the Instruction Manual before beginning installation. The Instruction Manual contains the most accurate and up-to-date instructions. The Gen 2 installation video may still be used as a general reference for the installation process. Updated installation videos are coming soon.

Note: The Splasher Kit is currently designed for use with the SEAFLO 750 GPH pump only.

The Decoy Doctor Splasher Kit is a DIY motion decoy conversion system designed for duck butt-style decoys. Using short, repeated pump bursts to rock the decoy back and forth.

Built on the same electrical platform used in the Decoy Doctor Swimmer Kit, the Splasher pairs a programmable Decoy Timer from Timers.Shop with the quiet, dependable performance of a SEAFLO 750 GPH pump. The timer gives you control over how often the decoy moves, while the pump delivers the smooth, low-noise operation the Decoy Doctor system is known for.

Fine-tune the timing to suit your decoy and your preferred presentation. Install the outlet tubing to direct water toward the decoy and create the splash effect, or remove it when less visible spray is preferred.

The Splasher Kit requires a duck butt-style decoy with suitable body shape, balance, mounting area, and internal clearance. Physical fit alone does not guarantee proper operation.

Verified compatible decoys:

Tanglefree Pro Mallard & Pro Pintail Duck Butts
Final Approach HD Mallard and HD Pintail Duck Butts
GHG Hunter Series Mallards

Additional modification may be required:

GHG Pro Grade duck butts: The Splasher Kit will fit these decoys, but additional modification may be required to balance the decoy. Adding counterweights inside the decoy may be necessary to achieve proper balance. These modifications are not covered in the Instruction Manual and will need to be determined by the user during installation.

Models not listed may still work but have not been verified. Use the included paper template to confirm the Adapter Ring footprint before modifying the decoy, and review the Instruction Manual for complete selection and verification guidance.

A Foundation for Custom Motion

The Decoy Doctor gives you a practical starting point for creating custom motion in a compatible decoy. Although it is designed around a bilge-pump system, it leaves room for builders and tinkerers to adapt the system and explore their own ideas.

Built for Long-Term Value

The Decoy Doctor is built around simple wiring and commonly available electrical components. You are not tied to a special connector, custom wiring harness, or hard-to-find replacement part.

Modular, Repairable, and Upgradeable

Key components can be serviced, replaced, or upgraded without replacing the entire system. The electrical assembly can be moved to another compatible decoy, and our Splasher Field Surgeon Kit offers a convenient way to keep select service items on hand.

Built for Real-World Use

The Decoy Doctor keeps operation simple with direct switch control. Turn it on when you want motion and turn it off when you don’t—without relying on apps, water activation, or unnecessary technology.

Choose Your Timer Setup

All timers are pre-programmed for 5 short burst intervals every 10 Seconds.

Standard Timer: Simple automatic operation with one programmable timing sequence. Turn it on and let it run through your hunt.

RC-Timer V2: Adds remote on/off control with advanced timer setup and the ability to program a second selectable timing sequence. One 4-channel remote can control multiple RC-equipped decoys, so only one remote is needed per group.

Standard Timer RC-Timer V2 + 4-Channel Remote RC-Timer V2 — No Remote

$60.00 USD

Sale Sold out

Shipping calculated at checkout.